Mazda 2009 Tribute HEV Spécifications télécharger pdf (Page 100)

You may also perform the following power door lock sequence to

enable/disable the perimeter lamps feature. Note: Before starting, ensure

the ignition is in the 1 (off) position and all vehicle doors are closed. You

must complete Steps 1–5 within 30 seconds or the procedure will have

to be repeated. If the procedure needs to be repeated, wait a minimum

of 30 seconds before beginning again.

1. The ignition must be off to

begin the sequence.

2. Place the key in the ignition and

turn the ignition to the 3 (on)

position.

3. Press the power door unlock

control on the door panel three

times.

4. Turn the ignition from the 3

(on) position to the 1 (off)

position.

5. Press the power door unlock control on the door panel three times.

6. Turn the ignition back to the 3 (on) position. The horn will chirp one

time to confirm programming mode has been entered and is active.

7. Press the power door unlock control twice within five seconds.

Note: The horn will chirp once to indicate the perimeter lighting

feature has been deactivated. The horn will chirp once and honk

once (one short and one long) to indicate the perimeter lighting

feature has been activated.

8. Turn the ignition to the 1 (off) position to exit the procedure.

Note: The horn will chirp once to confirm the procedure is

complete.

SECURILOCK™ PASSIVE ANTI-THEFT SYSTEM

SecuriLock™ passive anti-theft system is an engine immobilization

system. This system is designed to help prevent the engine from being

started unless a coded Integrated Keyhead Transmitter (IKT)

programmed to your vehicle is used. The use of the wrong type of

coded key may lead to a “no-start” condition.

2009 Tribute Hybrid (thv)

Owners Guide, 1st Printing

USA (fus)

Locks and Security

100

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 324 325

Pas de commentaire

Mazda 2009 Tribute HEV Spécifications Page 100