Mazda 2008 5 Manuel d'utilisateur télécharger pdf (Page 256)

Black plate (256,1)

1. For vehicles equipped with an engine

cover, remo ve the engine cover.

2. Remove the battery cover from its front

side.

3. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

4. If the booster battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle with the booster battery and all

unnecessary electrical loads in both

vehicles.

5. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to the ground

point indi cated in the illustration

away from the discharged battery

(4).

6. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

7. When finished, carefully disconnect the

cables in the reverse order described in

the illustration.

8. If the engine cover and the battery

cover have been removed, install them

as they were previously installed.

NOTE

Verify that the covers are securely installed.

7-18

In Case of an Emergency

Emergency Starting

Mazda5_8X53-EA-07I_Edition1 Page256

Monday, September 3 2007 10:41 AM

Form No.8X53-EA-07I

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 375 376

Commentaires sur ces manuels

Pas de commentaire