Mazda 2012 CX-7 Spécifications télécharger pdf (Page 193)

Black plate (193,1)

qActivation/Deactivation

To activate the system, press the ON

switch.

The cruis e main indicator light (Amber)

illuminates.

Refer to Warning/Indicator Lights on page

4-15.

To deactivate the system, press the OFF

switch.

The cruis e main indicator light (Amber)

turns off.

WARNING

Always turn off the cruise control

system when it is not in use:

Leaving the cruise control system in

an activation-ready state while the

cruise control is not in use is

dangerous as the cruise control could

unexpectedly activate if the

activation button is accidentally

pressed, and result in loss of vehicle

control and an accident.

qTo Set Speed

1. Activate the cruis e control system by

pressing the ON switch.

The cruis e main indicator light

(Amber) illuminates. Refer to Warning/

Indicator Lights on page 4-15.

2. Accelerate to the desired speed, which

must be more than 25 km/h (16 mph).

3. Set the cruise control by pressing the

SET

or SET - switch at the desired

speed. The cruise control is set at the

moment the SET

or SET - switch is

pressed. Release the accelerator pedal

simultaneously. The cruise set indicator

light (Green) illuminates.

NOTE

l

Release the SET or SET - switch at the

desired speed, otherwise the speed will

continue increasing while the SET

switch is pressed and held, and continue

decreasing while the SET - switch is pressed

and held (except when the accelerator

pedal is depressed).

l

On a steep grade, the vehicle may

momentarily slow down while ascending,

or speed up while descending.

l

Cruise control will cancel if the vehicle

speed drops below 21 km/h (13 mph) when

cruise is activated, such as when climbing a

steep grade.

l

Cruise control may cancel at about 15 km/h

(9 mph) below the preset speed (such as

may happen when climbing a long, steep

grade).

qTo Increase Cruising Speed

Follow either of these procedures.

To increase speed using cruise control

switch

Press the SET

switch and hold it. Your

vehicle will accelerate.

Release the switch at the speed you want.

Press the SET

and release it

immediately to adjust the preset speed.

Multiple operations will increase the

preset speed according to the numbe r of

times it is operated.

Increasing speed with a single SET

operation

Meter display for vehicle speed indicated

in km/h: 1 km/h (0.6 mph)

Meter display for vehicle speed indicated

in mph: 1 mph (1.6 km/h)

When Driving

Cruise Control

4-69

CX-5_8CA5-EA-11L_Edition3 Page193

Friday, June 22 2012 3:45 PM

Form No.8CA5-EA-11L

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 487 488

Commentaires sur ces manuels

Pas de commentaire