Mazda 13B-MSP Informations techniques télécharger pdf (Page 75)

Powertrain Engines

Cylinder Head

• The cylinder head is a conventional construction with separate camshaft bearing caps.

• The cylinder head bolts are torque-to-yield bolts, which must be tightened in several

stages (refer to the workshop manual for details).

NOTE: The cylinder head bolts must not be re-used if their length exceeds the specification

(refer to the workshop manual for details).

• The leak-off lines for the fuel injectors are integrated in the cylinder head.

NOTE: Always replace the gaskets of the injector leak-off lines when removing them. As the

leak-off lines are located under the cylinder head cover, fuel leaking from the lines

can contaminate the engine oil. This results in oil dilution and hence in engine

damage.

L1001.4_01064

1 Exhaust side 3 Engine front side

2 Intake side

Curriculum Training 01-65

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 141 142

Pas de commentaire

Mazda 13B-MSP Informations techniques Page 75