Mazda 13B-MSP Manuel d'installation télécharger pdf (Page 11)

5. Connect the oil pressure line that was installed

in the step 3-2 to the turbocharger. Install the

turbocharger to the manifold using the provided

gasket and hardware.

(Parts Used #46, 66)

6. Reinstall the engine mount bracket and rubber,

then remove the SST tool.

7. Install the suction pipe S-3 to the turbo inlet

using the provided gasket and hardware.

(Parts Used #7, 44, 65)

8. Replace the oil drain plug with the provided oil

return fitting and copper washer.

(Parts Used #28, 29)

9. Install the oil return pipe to the turbo charger.

Wrap the thermo cloth to the 16∅ hose and

connect the oil return pipe to the oil pan.

(Parts Used #27, 32, 39, 50, 63)

10. Install the compression pipe C-1 to the turbo

out let using the provided gasket and

hardware.

(Parts Used #8, 45, 65)

11. Re install the actuator back on to the

turbocharger. Reinstall the e-clip back to the

swing valve.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Mazda 13B-MSP Manuel d'installation Page 11