Mazda 2006 RX-8 Spécifications télécharger pdf (Page 292)

Black plate (292,1)

4. Drain the system completely and

retighten the plug. Add as much

ethylene-glycol-based coolant mixture

and water as necessary to provide

freezing and corrosion protection.

5. In extremely cold climates, add the

mixture percentage recommend ed in

the coolant mixture percentage table.

6. Reinstall the cooling system cap.

7. Run the engine at idle for about 10

minutes, then turn it off. If the coolant

level warning light comes on during

this time, turn the engine off.

After turning off the engine , inspect the

drain plug and the water hoses for

leaks.

8. After the engine has cooled, remove

the cooling system cap and inspect the

coolant level. If it's low, repeat steps 5

to 7.

NOTE

Because this procedure requires

technical expertise, we recommend that

it be done by an Authorized Mazda

Dealer.

Brake/Clutch Fluid

q

Inspecting Brake/Clutch Fluid Level

The brakes and clutch draw fluid from the

same reservoir.

Inspect the fluid level in the reservoir

regularly. It should be kept at MAX.

The level normally drops with

accumulated distance, a condition

associated with wear of brake and clutch

linings. If it is excessively low, have the

brake/clutch system inspected by an

Authorized Mazda Dealer.

8-18

Maintenance and Care

Owner Maintenance

RX-8_8U58-EA-05J_Edition1 Page292

Thursday, August 25 2005 4:59 PM

Form No.8U58-EA-05J

1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 433 434

Commentaires sur ces manuels

Pas de commentaire